longlong

They could be useful anywhere.

BUILD.md

@@ -233,10 +233,10 @@ You can then [run](README.md#run) _scrcpy_.
 
 ## Prebuilt server
 
- - [`scrcpy-server-v1.12.1`][direct-scrcpy-server]  
+ - [`scrcpy-server-v1.12`][direct-scrcpy-server]  
-   _(SHA-256: 63e569c8a1d0c1df31d48c4214871c479a601782945fed50c1e61167d78266ea)_
+   _(SHA-256: b6595262c230e9773fdb817257abcc8c6e6e00f15b1c32b6a850ccfd8176dc10)_
 
-[direct-scrcpy-server]: https://github.com/Genymobile/scrcpy/releases/download/v1.12.1/scrcpy-server-v1.12.1
+[direct-scrcpy-server]: https://github.com/Genymobile/scrcpy/releases/download/v1.12/scrcpy-server-v1.12
 
 Download the prebuilt server somewhere, and specify its path during the Meson
 configuration:

DEVELOP.md

@@ -189,7 +189,7 @@ The client uses 4 threads:
    recording,
  - the **controller** thread, sending _control messages_ to the server,
  - the **receiver** thread (managed by the controller), receiving _device
-   messages_ from the server.
+   messages_ from the client.
 
 In addition, another thread can be started if necessary to handle APK
 installation or file push requests (via drag&drop on the main window) or to
@@ -214,7 +214,7 @@ When a new decoded frame is available, the decoder _swaps_ the decoding and
 rendering frame (with proper synchronization). Thus, it immediatly starts
 to decode a new frame while the main thread renders the last one.
 
-If a [recorder] is present (i.e. `--record` is enabled), then it muxes the raw
+If a [recorder] is present (i.e. `--record` is enabled), then its muxes the raw
 H.264 packet to the output video file.
 
 [stream]: https://github.com/Genymobile/scrcpy/blob/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/app/src/stream.h

LICENSE

@@ -188,7 +188,7 @@
       identification within third-party archives.
 
    Copyright (C) 2018 Genymobile
-   Copyright (C) 2018-2020 Romain Vimont
+   Copyright (C) 2018-2019 Romain Vimont
 
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.

README.ko.md

@@ -475,7 +475,7 @@ _²화면이 꺼진 상태에서 우클릭 시 다시 켜지며, 그 외의 상
 ## 라이선스
 
     Copyright (C) 2018 Genymobile
-    Copyright (C) 2018-2020 Romain Vimont
+    Copyright (C) 2018-2019 Romain Vimont
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.

README.md

@@ -1,4 +1,4 @@
-# scrcpy (v1.12.1)
+# scrcpy (v1.12)
 
 This application provides display and control of Android devices connected on
 USB (or [over TCP/IP][article-tcpip]). It does not require any _root_ access.
@@ -37,11 +37,8 @@ control it using keyboard and mouse.
 
 ### Linux
 
-In Debian (_testing_ and _sid_ for now):
+On Linux, you typically need to [build the app manually][BUILD]. Don't worry,
-
+it's not that hard.
-```
-apt install scrcpy
-```
 
 A [Snap] package is available: [`scrcpy`][snap-link].
 
@@ -59,37 +56,19 @@ For Gentoo, an [Ebuild] is available: [`scrcpy/`][ebuild-link].
 [Ebuild]: https://wiki.gentoo.org/wiki/Ebuild
 [ebuild-link]: https://github.com/maggu2810/maggu2810-overlay/tree/master/app-mobilephone/scrcpy
 
-You could also [build the app manually][BUILD] (don't worry, it's not that
-hard).
-
-
 
 ### Windows
 
 For Windows, for simplicity, prebuilt archives with all the dependencies
 (including `adb`) are available:
 
- - [`scrcpy-win32-v1.12.1.zip`][direct-win32]  
+ - [`scrcpy-win32-v1.12.zip`][direct-win32]  
-   _(SHA-256: 0f4b3b063536b50a2df05dc42c760f9cc0093a9a26dbdf02d8232c74dab43480)_
+   _(SHA-256: b2c8c4a3899c037cf448a2102906775114826ba646ce1b847826925103fa801d)_
- - [`scrcpy-win64-v1.12.1.zip`][direct-win64]  
+ - [`scrcpy-win64-v1.12.zip`][direct-win64]  
-   _(SHA-256: 57d34b6d16cfd9fe169bc37c4df58ebd256d05c1ea3febc63d9cb0a027ab47c9)_
+   _(SHA-256: 7d47983b426f7287de0230b88975dc17c1d9c343fa61a93ff2af78b6e9ef5c8c)_
 
-[direct-win32]: https://github.com/Genymobile/scrcpy/releases/download/v1.12.1/scrcpy-win32-v1.12.1.zip
+[direct-win32]: https://github.com/Genymobile/scrcpy/releases/download/v1.12/scrcpy-win32-v1.12.zip
-[direct-win64]: https://github.com/Genymobile/scrcpy/releases/download/v1.12.1/scrcpy-win64-v1.12.1.zip
+[direct-win64]: https://github.com/Genymobile/scrcpy/releases/download/v1.12/scrcpy-win64-v1.12.zip
-
-It is also available in [Chocolatey]:
-
-[Chocolatey]: https://chocolatey.org/
-
-```bash
-choco install scrcpy
-```
-
-You need `adb`, accessible from your `PATH`. If you don't have it yet:
-
-```bash
-choco install adb
-```
 
 You can also [build the app manually][BUILD].
 
@@ -177,21 +156,6 @@ scrcpy --crop 1224:1440:0:0   # 1224x1440 at offset (0,0)
 If `--max-size` is also specified, resizing is applied after cropping.
 
 
-#### Lock video orientation
-
-
-To lock the orientation of the mirroring:
-
-```bash
-scrcpy --lock-video-orientation 0   # natural orientation
-scrcpy --lock-video-orientation 1   # 90° counterclockwise
-scrcpy --lock-video-orientation 2   # 180°
-scrcpy --lock-video-orientation 3   # 90° clockwise
-```
-
-This affects recording orientation.
-
-
 ### Recording
 
 It is possible to record the screen while mirroring:
@@ -250,13 +214,6 @@ scrcpy --serial 0123456789abcdef
 scrcpy -s 0123456789abcdef  # short version
 ```
 
-If the device is connected over TCP/IP:
-
-```bash
-scrcpy --serial 192.168.0.1:5555
-scrcpy -s 192.168.0.1:5555  # short version
-```
-
 You can start several instances of _scrcpy_ for several devices.
 
 #### SSH tunnel
@@ -532,7 +489,7 @@ Read the [developers page].
 ## Licence
 
     Copyright (C) 2018 Genymobile
-    Copyright (C) 2018-2020 Romain Vimont
+    Copyright (C) 2018-2019 Romain Vimont
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.

app/meson.build

@@ -106,12 +106,6 @@ conf.set('DEFAULT_LOCAL_PORT', '27183')
 # overridden by option --max-size
 conf.set('DEFAULT_MAX_SIZE', '0')  # 0: unlimited
 
-# the default video orientation
-# natural device orientation is 0 and each increment adds 90 degrees
-# counterclockwise
-# overridden by option --lock-video-orientation
-conf.set('DEFAULT_LOCK_VIDEO_ORIENTATION', '-1')  # -1: unlocked
-
 # the default video bitrate, in bits/second
 # overridden by option --bit-rate
 conf.set('DEFAULT_BIT_RATE', '8000000')  # 8Mbps

app/scrcpy.1

@@ -41,12 +41,6 @@ Start in fullscreen.
 .B \-h, \-\-help
 Print this help.
 
-.TP
-.BI "\-\-lock\-video\-orientation " value
-Lock video orientation to \fIvalue\fR. Values are integers in the range [-1..3]. Natural device orientation is 0 and each increment adds 90 degrees counterclockwise.
-
-Default is -1 (unlocked).
-
 .TP
 .BI "\-\-max\-fps " value
 Limit the framerate of screen capture (only supported on devices with Android >= 10).
@@ -267,7 +261,7 @@ Copyright \(co 2018 Genymobile
 Genymobile
 .UE
 
-Copyright \(co 2018\-2020
+Copyright \(co 2018\-2019
 .MT rom@rom1v.com
 Romain Vimont
 .ME

app/src/cli.c

@@ -2,6 +2,7 @@
 
 #include <getopt.h>
 #include <stdint.h>
+#include <stdio.h>
 #include <unistd.h>
 
 #include "config.h"
@@ -41,12 +42,6 @@ scrcpy_print_usage(const char *arg0) {
         "    -h, --help\n"
         "        Print this help.\n"
         "\n"
-        "    --lock-video-orientation value\n"
-        "        Lock video orientation to value. Values are integers in the\n"
-        "        range [-1..3]. Natural device orientation is 0 and each\n"
-        "        increment adds 90 degrees counterclockwise.\n"
-        "        Default is %d%s.\n"
-        "\n"
         "    --max-fps value\n"
         "        Limit the frame rate of screen capture (only supported on\n"
         "        devices with Android >= 10).\n"
@@ -199,14 +194,13 @@ scrcpy_print_usage(const char *arg0) {
         arg0,
         DEFAULT_BIT_RATE,
         DEFAULT_MAX_SIZE, DEFAULT_MAX_SIZE ? "" : " (unlimited)",
-        DEFAULT_LOCK_VIDEO_ORIENTATION, DEFAULT_LOCK_VIDEO_ORIENTATION >= 0 ? "" : " (unlocked)",
         DEFAULT_LOCAL_PORT);
 }
 
 static bool
-parse_integer_arg(const char *s, long *out, bool accept_suffix, long min,
+parse_integer_arg(const char *s, long long *out, bool accept_suffix,
-                  long max, const char *name) {
+                  long long min, long long max, const char *name) {
-    long value;
+    long long value;
     bool ok;
     if (accept_suffix) {
         ok = parse_integer_with_suffix(s, &value);
@@ -219,8 +213,8 @@ parse_integer_arg(const char *s, long *out, bool accept_suffix, long min,
     }
 
     if (value < min || value > max) {
-        LOGE("Could not parse %s: value (%ld) out-of-range (%ld; %ld)",
+        LOGE("Could not parse %s: value (%" PRIlld ") out-of-range (%"
-             name, value, min, max);
+             PRIlld "; %" PRIlld ")", name, value, min, max);
         return false;
     }
 
@@ -230,10 +224,8 @@ parse_integer_arg(const char *s, long *out, bool accept_suffix, long min,
 
 static bool
 parse_bit_rate(const char *s, uint32_t *bit_rate) {
-    long value;
+    long long value;
-    // long may be 32 bits (it is the case on mingw), so do not use more than
+    bool ok = parse_integer_arg(s, &value, true, 0, 0xFFFFFFFFLL, "bit-rate");
-    // 31 bits (long is signed)
-    bool ok = parse_integer_arg(s, &value, true, 0, 0x7FFFFFFF, "bit-rate");
     if (!ok) {
         return false;
     }
@@ -244,7 +236,7 @@ parse_bit_rate(const char *s, uint32_t *bit_rate) {
 
 static bool
 parse_max_size(const char *s, uint16_t *max_size) {
-    long value;
+    long long value;
     bool ok = parse_integer_arg(s, &value, false, 0, 0xFFFF, "max size");
     if (!ok) {
         return false;
@@ -256,7 +248,7 @@ parse_max_size(const char *s, uint16_t *max_size) {
 
 static bool
 parse_max_fps(const char *s, uint16_t *max_fps) {
-    long value;
+    long long value;
     bool ok = parse_integer_arg(s, &value, false, 0, 1000, "max fps");
     if (!ok) {
         return false;
@@ -266,22 +258,9 @@ parse_max_fps(const char *s, uint16_t *max_fps) {
     return true;
 }
 
-static bool
-parse_lock_video_orientation(const char *s, int8_t *lock_video_orientation) {
-    long value;
-    bool ok = parse_integer_arg(s, &value, false, -1, 3,
-                                "lock video orientation");
-    if (!ok) {
-        return false;
-    }
-
-    *lock_video_orientation = (int8_t) value;
-    return true;
-}
-
 static bool
 parse_window_position(const char *s, int16_t *position) {
-    long value;
+    long long value;
     bool ok = parse_integer_arg(s, &value, false, -1, 0x7FFF,
                                 "window position");
     if (!ok) {
@@ -294,7 +273,7 @@ parse_window_position(const char *s, int16_t *position) {
 
 static bool
 parse_window_dimension(const char *s, uint16_t *dimension) {
-    long value;
+    long long value;
     bool ok = parse_integer_arg(s, &value, false, 0, 0xFFFF,
                                 "window dimension");
     if (!ok) {
@@ -307,7 +286,7 @@ parse_window_dimension(const char *s, uint16_t *dimension) {
 
 static bool
 parse_port(const char *s, uint16_t *port) {
-    long value;
+    long long value;
     bool ok = parse_integer_arg(s, &value, false, 0, 0xFFFF, "port");
     if (!ok) {
         return false;
@@ -347,54 +326,51 @@ guess_record_format(const char *filename) {
     return 0;
 }
 
-#define OPT_RENDER_EXPIRED_FRAMES  1000
+#define OPT_RENDER_EXPIRED_FRAMES 1000
-#define OPT_WINDOW_TITLE           1001
+#define OPT_WINDOW_TITLE          1001
-#define OPT_PUSH_TARGET            1002
+#define OPT_PUSH_TARGET           1002
-#define OPT_ALWAYS_ON_TOP          1003
+#define OPT_ALWAYS_ON_TOP         1003
-#define OPT_CROP                   1004
+#define OPT_CROP                  1004
-#define OPT_RECORD_FORMAT          1005
+#define OPT_RECORD_FORMAT         1005
-#define OPT_PREFER_TEXT            1006
+#define OPT_PREFER_TEXT           1006
-#define OPT_WINDOW_X               1007
+#define OPT_WINDOW_X              1007
-#define OPT_WINDOW_Y               1008
+#define OPT_WINDOW_Y              1008
-#define OPT_WINDOW_WIDTH           1009
+#define OPT_WINDOW_WIDTH          1009
-#define OPT_WINDOW_HEIGHT          1010
+#define OPT_WINDOW_HEIGHT         1010
-#define OPT_WINDOW_BORDERLESS      1011
+#define OPT_WINDOW_BORDERLESS     1011
-#define OPT_MAX_FPS                1012
+#define OPT_MAX_FPS               1012
-#define OPT_LOCK_VIDEO_ORIENTATION 1013
 
 bool
 scrcpy_parse_args(struct scrcpy_cli_args *args, int argc, char *argv[]) {
     static const struct option long_options[] = {
-        {"always-on-top",          no_argument,       NULL, OPT_ALWAYS_ON_TOP},
+        {"always-on-top",         no_argument,       NULL, OPT_ALWAYS_ON_TOP},
-        {"bit-rate",               required_argument, NULL, 'b'},
+        {"bit-rate",              required_argument, NULL, 'b'},
-        {"crop",                   required_argument, NULL, OPT_CROP},
+        {"crop",                  required_argument, NULL, OPT_CROP},
-        {"fullscreen",             no_argument,       NULL, 'f'},
+        {"fullscreen",            no_argument,       NULL, 'f'},
-        {"help",                   no_argument,       NULL, 'h'},
+        {"help",                  no_argument,       NULL, 'h'},
-        {"lock-video-orientation", required_argument, NULL,
+        {"max-fps",               required_argument, NULL, OPT_MAX_FPS},
-                                                  OPT_LOCK_VIDEO_ORIENTATION},
+        {"max-size",              required_argument, NULL, 'm'},
-        {"max-fps",                required_argument, NULL, OPT_MAX_FPS},
+        {"no-control",            no_argument,       NULL, 'n'},
-        {"max-size",               required_argument, NULL, 'm'},
+        {"no-display",            no_argument,       NULL, 'N'},
-        {"no-control",             no_argument,       NULL, 'n'},
+        {"port",                  required_argument, NULL, 'p'},
-        {"no-display",             no_argument,       NULL, 'N'},
+        {"push-target",           required_argument, NULL, OPT_PUSH_TARGET},
-        {"port",                   required_argument, NULL, 'p'},
+        {"record",                required_argument, NULL, 'r'},
-        {"push-target",            required_argument, NULL, OPT_PUSH_TARGET},
+        {"record-format",         required_argument, NULL, OPT_RECORD_FORMAT},
-        {"record",                 required_argument, NULL, 'r'},
+        {"render-expired-frames", no_argument,       NULL,
-        {"record-format",          required_argument, NULL, OPT_RECORD_FORMAT},
+                                                     OPT_RENDER_EXPIRED_FRAMES},
-        {"render-expired-frames",  no_argument,       NULL,
+        {"serial",                required_argument, NULL, 's'},
-                                                  OPT_RENDER_EXPIRED_FRAMES},
+        {"show-touches",          no_argument,       NULL, 't'},
-        {"serial",                 required_argument, NULL, 's'},
+        {"turn-screen-off",       no_argument,       NULL, 'S'},
-        {"show-touches",           no_argument,       NULL, 't'},
+        {"prefer-text",           no_argument,       NULL, OPT_PREFER_TEXT},
-        {"turn-screen-off",        no_argument,       NULL, 'S'},
+        {"version",               no_argument,       NULL, 'v'},
-        {"prefer-text",            no_argument,       NULL, OPT_PREFER_TEXT},
+        {"window-title",          required_argument, NULL, OPT_WINDOW_TITLE},
-        {"version",                no_argument,       NULL, 'v'},
+        {"window-x",              required_argument, NULL, OPT_WINDOW_X},
-        {"window-title",           required_argument, NULL, OPT_WINDOW_TITLE},
+        {"window-y",              required_argument, NULL, OPT_WINDOW_Y},
-        {"window-x",               required_argument, NULL, OPT_WINDOW_X},
+        {"window-width",          required_argument, NULL, OPT_WINDOW_WIDTH},
-        {"window-y",               required_argument, NULL, OPT_WINDOW_Y},
+        {"window-height",         required_argument, NULL, OPT_WINDOW_HEIGHT},
-        {"window-width",           required_argument, NULL, OPT_WINDOW_WIDTH},
+        {"window-borderless",     no_argument,       NULL,
-        {"window-height",          required_argument, NULL, OPT_WINDOW_HEIGHT},
+                                                     OPT_WINDOW_BORDERLESS},
-        {"window-borderless",      no_argument,       NULL,
+        {NULL,                    0,                 NULL, 0  },
-                                                  OPT_WINDOW_BORDERLESS},
-        {NULL,                     0,                 NULL, 0  },
     };
 
     struct scrcpy_options *opts = &args->opts;
@@ -440,11 +416,6 @@ scrcpy_parse_args(struct scrcpy_cli_args *args, int argc, char *argv[]) {
                     return false;
                 }
                 break;
-            case OPT_LOCK_VIDEO_ORIENTATION:
-                if (!parse_lock_video_orientation(optarg, &opts->lock_video_orientation)) {
-                    return false;
-                }
-                break;
             case 'n':
                 opts->control = false;
                 break;

app/src/command.h

@@ -4,38 +4,8 @@
 #include <stdbool.h>
 #include <inttypes.h>
 
-#ifdef _WIN32
-
- // not needed here, but winsock2.h must never be included AFTER windows.h
-# include <winsock2.h>
-# include <windows.h>
-# define PATH_SEPARATOR '\\'
-# define PRIexitcode "lu"
-// <https://stackoverflow.com/a/44383330/1987178>
-# ifdef _WIN64
-#   define PRIsizet PRIu64
-# else
-#   define PRIsizet PRIu32
-# endif
-# define PROCESS_NONE NULL
-# define NO_EXIT_CODE -1u // max value as unsigned
-  typedef HANDLE process_t;
-  typedef DWORD exit_code_t;
-
-#else
-
-# include <sys/types.h>
-# define PATH_SEPARATOR '/'
-# define PRIsizet "zu"
-# define PRIexitcode "d"
-# define PROCESS_NONE -1
-# define NO_EXIT_CODE -1
-  typedef pid_t process_t;
-  typedef int exit_code_t;
-
-#endif
-
 #include "config.h"
+#include "common.h"
 
 enum process_result {
     PROCESS_SUCCESS,

app/src/common.h

@@ -5,6 +5,44 @@
 
 #include "config.h"
 
+#ifdef _WIN32
+
+ // not needed here, but winsock2.h must never be included AFTER windows.h
+# include <winsock2.h>
+# include <windows.h>
+# define PATH_SEPARATOR '\\'
+# define PRIexitcode "lu"
+// <https://stackoverflow.com/a/44383330/1987178>
+# ifdef _WIN64
+#   define PRIsizet PRIu64
+# else
+#   define PRIsizet PRIu32
+# endif
+# define PROCESS_NONE NULL
+# define NO_EXIT_CODE -1u // max value as unsigned
+  typedef HANDLE process_t;
+  typedef DWORD exit_code_t;
+
+#else
+
+# include <sys/types.h>
+# define PATH_SEPARATOR '/'
+# define PRIsizet "zu"
+# define PRIexitcode "d"
+# define PROCESS_NONE -1
+# define NO_EXIT_CODE -1
+  typedef pid_t process_t;
+  typedef int exit_code_t;
+
+#endif
+
+// in MinGW, "%ll" is not supported as printf format for long long
+# ifdef __MINGW32__
+#   define PRIlld "I64d"
+# else
+#   define PRIlld "lld"
+# endif
+
 #define ARRAY_LEN(a) (sizeof(a) / sizeof(a[0]))
 #define MIN(X,Y) (X) < (Y) ? (X) : (Y)
 #define MAX(X,Y) (X) > (Y) ? (X) : (Y)

app/src/scrcpy.c

@@ -284,7 +284,6 @@ scrcpy(const struct scrcpy_options *options) {
         .max_size = options->max_size,
         .bit_rate = options->bit_rate,
         .max_fps = options->max_fps,
-        .lock_video_orientation = options->lock_video_orientation,
         .control = options->control,
     };
     if (!server_start(&server, options->serial, &params)) {

app/src/scrcpy.h

@@ -19,7 +19,6 @@ struct scrcpy_options {
     uint16_t max_size;
     uint32_t bit_rate;
     uint16_t max_fps;
-    int8_t lock_video_orientation;
     int16_t window_x;
     int16_t window_y;
     uint16_t window_width;
@@ -46,7 +45,6 @@ struct scrcpy_options {
     .max_size = DEFAULT_MAX_SIZE, \
     .bit_rate = DEFAULT_BIT_RATE, \
     .max_fps = 0, \
-    .lock_video_orientation = DEFAULT_LOCK_VIDEO_ORIENTATION, \
     .window_x = -1, \
     .window_y = -1, \
     .window_width = 0, \

app/src/server.c

@@ -124,11 +124,9 @@ execute_server(struct server *server, const struct server_params *params) {
     char max_size_string[6];
     char bit_rate_string[11];
     char max_fps_string[6];
-    char lock_video_orientation_string[3];
     sprintf(max_size_string, "%"PRIu16, params->max_size);
     sprintf(bit_rate_string, "%"PRIu32, params->bit_rate);
     sprintf(max_fps_string, "%"PRIu16, params->max_fps);
-    sprintf(lock_video_orientation_string, "%"PRIi8, params->lock_video_orientation);
     const char *const cmd[] = {
         "shell",
         "CLASSPATH=" DEVICE_SERVER_PATH,
@@ -144,7 +142,6 @@ execute_server(struct server *server, const struct server_params *params) {
         max_size_string,
         bit_rate_string,
         max_fps_string,
-        lock_video_orientation_string,
         server->tunnel_forward ? "true" : "false",
         params->crop ? params->crop : "-",
         "true", // always send frame meta (packet boundaries + timestamp)

app/src/server.h

@@ -36,7 +36,6 @@ struct server_params {
     uint16_t max_size;
     uint32_t bit_rate;
     uint16_t max_fps;
-    int8_t lock_video_orientation;
     bool control;
 };
 

app/src/util/str_util.c

@@ -63,13 +63,13 @@ strquote(const char *src) {
 }
 
 bool
-parse_integer(const char *s, long *out) {
+parse_integer(const char *s, long long *out) {
     char *endptr;
     if (*s == '\0') {
         return false;
     }
     errno = 0;
-    long value = strtol(s, &endptr, 0);
+    long long value = strtol(s, &endptr, 0);
     if (errno == ERANGE) {
         return false;
     }
@@ -82,13 +82,13 @@ parse_integer(const char *s, long *out) {
 }
 
 bool
-parse_integer_with_suffix(const char *s, long *out) {
+parse_integer_with_suffix(const char *s, long long *out) {
     char *endptr;
     if (*s == '\0') {
         return false;
     }
     errno = 0;
-    long value = strtol(s, &endptr, 0);
+    long long value = strtoll(s, &endptr, 0);
     if (errno == ERANGE) {
         return false;
     }
@@ -106,8 +106,8 @@ parse_integer_with_suffix(const char *s, long *out) {
         }
     }
 
-    if ((value < 0 && LONG_MIN / mul > value) ||
+    if ((value < 0 && LLONG_MIN / mul > value) ||
-        (value > 0 && LONG_MAX / mul < value)) {
+        (value > 0 && LLONG_MAX / mul < value)) {
         return false;
     }
 

app/src/util/str_util.h

@@ -29,14 +29,14 @@ strquote(const char *src);
 // parse s as an integer into value
 // returns true if the conversion succeeded, false otherwise
 bool
-parse_integer(const char *s, long *out);
+parse_integer(const char *s, long long *out);
 
 // parse s as an integer into value
 // like parse_integer(), but accept 'k'/'K' (x1000) and 'm'/'M' (x1000000) as
 // suffix
 // returns true if the conversion succeeded, false otherwise
 bool
-parse_integer_with_suffix(const char *s, long *out);
+parse_integer_with_suffix(const char *s, long long *out);
 
 // return the index to truncate a UTF-8 string at a valid position
 size_t

app/tests/test_cli.c

@@ -48,7 +48,6 @@ static void test_options(void) {
         "--fullscreen",
         "--max-fps", "30",
         "--max-size", "1024",
-        "--lock-video-orientation", "2",
         // "--no-control" is not compatible with "--turn-screen-off"
         // "--no-display" is not compatible with "--fulscreen"
         "--port", "1234",
@@ -79,7 +78,6 @@ static void test_options(void) {
     assert(opts->fullscreen);
     assert(opts->max_fps == 30);
     assert(opts->max_size == 1024);
-    assert(opts->lock_video_orientation == 2);
     assert(opts->port == 1234);
     assert(!strcmp(opts->push_target, "/sdcard/Movies"));
     assert(!strcmp(opts->record_filename, "file"));

app/tests/test_strutil.c

@@ -171,7 +171,7 @@ static void test_utf8_truncate(void) {
 }
 
 static void test_parse_integer(void) {
-    long value;
+    long long value;
     bool ok = parse_integer("1234", &value);
     assert(ok);
     assert(value == 1234);
@@ -188,7 +188,7 @@ static void test_parse_integer(void) {
 }
 
 static void test_parse_integer_with_suffix(void) {
-    long value;
+    long long value;
     bool ok = parse_integer_with_suffix("1234", &value);
     assert(ok);
     assert(value == 1234);

meson.build

@@ -1,5 +1,5 @@
 project('scrcpy', 'c',
-        version: '1.12.1',
+        version: '1.12',
         meson_version: '>= 0.37',
         default_options: [
             'c_std=c11',

server/build.gradle

@@ -6,8 +6,8 @@ android {
         applicationId "com.genymobile.scrcpy"
         minSdkVersion 21
         targetSdkVersion 29
-        versionCode 14
+        versionCode 13
-        versionName "1.12.1"
+        versionName "1.12"
         testInstrumentationRunner "android.support.test.runner.AndroidJUnitRunner"
     }
     buildTypes {

server/build_without_gradle.sh

@@ -12,7 +12,7 @@
 set -e
 
 SCRCPY_DEBUG=false
-SCRCPY_VERSION_NAME=1.12.1
+SCRCPY_VERSION_NAME=1.12
 
 PLATFORM=${ANDROID_PLATFORM:-29}
 BUILD_TOOLS=${ANDROID_BUILD_TOOLS:-29.0.2}

server/src/main/java/com/genymobile/scrcpy/Device.java

@@ -22,13 +22,10 @@ public final class Device {
 
     private final ServiceManager serviceManager = new ServiceManager();
 
-
-    private final int lockedVideoOrientation;
     private ScreenInfo screenInfo;
     private RotationListener rotationListener;
 
     public Device(Options options) {
-        lockedVideoOrientation = options.getLockedVideoOrientation();
         screenInfo = computeScreenInfo(options.getCrop(), options.getMaxSize());
         registerRotationWatcher(new IRotationWatcher.Stub() {
             @Override
@@ -51,11 +48,11 @@ public final class Device {
 
     private ScreenInfo computeScreenInfo(Rect crop, int maxSize) {
         DisplayInfo displayInfo = serviceManager.getDisplayManager().getDisplayInfo();
-        int rotation = displayInfo.getRotation();
+        boolean rotated = (displayInfo.getRotation() & 1) != 0;
         Size deviceSize = displayInfo.getSize();
         Rect contentRect = new Rect(0, 0, deviceSize.getWidth(), deviceSize.getHeight());
         if (crop != null) {
-            if (rotation % 2 != 0) { // 180s preserve dimensions
+            if (rotated) {
                 // the crop (provided by the user) is expressed in the natural orientation
                 crop = flipRect(crop);
             }
@@ -67,7 +64,7 @@ public final class Device {
         }
 
         Size videoSize = computeVideoSize(contentRect.width(), contentRect.height(), maxSize);
-        return new ScreenInfo(contentRect, videoSize, rotation);
+        return new ScreenInfo(contentRect, videoSize, rotated);
     }
 
     private static String formatCrop(Rect rect) {
@@ -102,55 +99,22 @@ public final class Device {
         return new Size(w, h);
     }
 
-    /**
-     * Return the rotation to apply to the device rotation to get the requested locked video orientation
-     *
-     * @param deviceRotation the device rotation
-     * @return the rotation offset
-     */
-    public int getVideoRotation(int deviceRotation) {
-        if (lockedVideoOrientation == -1) {
-            // no offset
-            return 0;
-        }
-        return (deviceRotation + 4 - lockedVideoOrientation) % 4;
-    }
-
-    /**
-     * Return the rotation to apply to the requested locked video orientation to get the device rotation
-     * @param deviceRotation the device rotation
-     * @return the (reverse) rotation offset
-     */
-    private int getReverseVideoRotation(int deviceRotation) {
-        if (lockedVideoOrientation == -1) {
-            // no offset
-            return 0;
-        }
-        return (lockedVideoOrientation + 4 - deviceRotation) % 4;
-    }
-
     public Point getPhysicalPoint(Position position) {
         // it hides the field on purpose, to read it with a lock
         @SuppressWarnings("checkstyle:HiddenField")
         ScreenInfo screenInfo = getScreenInfo(); // read with synchronization
         Size videoSize = screenInfo.getVideoSize();
-
+        Size clientVideoSize = position.getScreenSize();
-        int deviceRotation = screenInfo.getRotation();
-        int reverseVideoRotation = getReverseVideoRotation(deviceRotation);
-        // reverse the video rotation to apply the events
-        Position devicePosition = position.rotate(reverseVideoRotation);
-
-        Size clientVideoSize = devicePosition.getScreenSize();
         if (!videoSize.equals(clientVideoSize)) {
             // The client sends a click relative to a video with wrong dimensions,
             // the device may have been rotated since the event was generated, so ignore the event
             return null;
         }
         Rect contentRect = screenInfo.getContentRect();
-        Point point = devicePosition.getPoint();
+        Point point = position.getPoint();
-        int convertedX = contentRect.left + point.getX() * contentRect.width() / videoSize.getWidth();
+        int scaledX = contentRect.left + point.getX() * contentRect.width() / videoSize.getWidth();
-        int convertedY = contentRect.top + point.getY() * contentRect.height() / videoSize.getHeight();
+        int scaledY = contentRect.top + point.getY() * contentRect.height() / videoSize.getHeight();
-        return new Point(convertedX, convertedY);
+        return new Point(scaledX, scaledY);
     }
 
     public static String getDeviceName() {

server/src/main/java/com/genymobile/scrcpy/Options.java

@@ -6,7 +6,6 @@ public class Options {
     private int maxSize;
     private int bitRate;
     private int maxFps;
-    private int lockedVideoOrientation;
     private boolean tunnelForward;
     private Rect crop;
     private boolean sendFrameMeta; // send PTS so that the client may record properly
@@ -36,14 +35,6 @@ public class Options {
         this.maxFps = maxFps;
     }
 
-    public int getLockedVideoOrientation() {
-        return lockedVideoOrientation;
-    }
-
-    public void setLockedVideoOrientation(int lockedVideoOrientation) {
-        this.lockedVideoOrientation = lockedVideoOrientation;
-    }
-
     public boolean isTunnelForward() {
         return tunnelForward;
     }

server/src/main/java/com/genymobile/scrcpy/Position.java

@@ -23,19 +23,6 @@ public class Position {
         return screenSize;
     }
 
-    public Position rotate(int rotation) {
-        switch (rotation) {
-            case 1:
-                return new Position(new Point(screenSize.getHeight() - point.getY(), point.getX()), screenSize.rotate());
-            case 2:
-                return new Position(new Point(screenSize.getWidth() - point.getX(), screenSize.getHeight() - point.getY()), screenSize);
-            case 3:
-                return new Position(new Point(point.getY(), screenSize.getWidth() - point.getX()), screenSize.rotate());
-            default:
-                return this;
-        }
-    }
-
     @Override
     public boolean equals(Object o) {
         if (this == o) {

server/src/main/java/com/genymobile/scrcpy/ScreenEncoder.java

@@ -27,21 +27,19 @@ public class ScreenEncoder implements Device.RotationListener {
 
     private int bitRate;
     private int maxFps;
-    private int lockedVideoOrientation;
     private int iFrameInterval;
     private boolean sendFrameMeta;
     private long ptsOrigin;
 
-    public ScreenEncoder(boolean sendFrameMeta, int bitRate, int maxFps, int lockedVideoOrientation, int iFrameInterval) {
+    public ScreenEncoder(boolean sendFrameMeta, int bitRate, int maxFps, int iFrameInterval) {
         this.sendFrameMeta = sendFrameMeta;
         this.bitRate = bitRate;
         this.maxFps = maxFps;
-        this.lockedVideoOrientation = lockedVideoOrientation;
         this.iFrameInterval = iFrameInterval;
     }
 
-    public ScreenEncoder(boolean sendFrameMeta, int bitRate, int maxFps, int lockedVideoOrientation) {
+    public ScreenEncoder(boolean sendFrameMeta, int bitRate, int maxFps) {
-        this(sendFrameMeta, bitRate, maxFps, lockedVideoOrientation, DEFAULT_I_FRAME_INTERVAL);
+        this(sendFrameMeta, bitRate, maxFps, DEFAULT_I_FRAME_INTERVAL);
     }
 
     @Override
@@ -64,14 +62,12 @@ public class ScreenEncoder implements Device.RotationListener {
             do {
                 MediaCodec codec = createCodec();
                 IBinder display = createDisplay();
-                ScreenInfo screenInfo = device.getScreenInfo();
+                Rect contentRect = device.getScreenInfo().getContentRect();
-                Rect contentRect = screenInfo.getContentRect();
+                Rect videoRect = device.getScreenInfo().getVideoSize().toRect();
-                Rect videoRect = screenInfo.getVideoSize().toRect();
+                setSize(format, videoRect.width(), videoRect.height());
-                int videoRotation = device.getVideoRotation(screenInfo.getRotation());
-                setSize(format, videoRotation, videoRect.width(), videoRect.height());
                 configure(codec, format);
                 Surface surface = codec.createInputSurface();
-                setDisplaySurface(display, surface, videoRotation, contentRect, videoRect);
+                setDisplaySurface(display, surface, contentRect, videoRect);
                 codec.start();
                 try {
                     alive = encode(codec, fd);
@@ -171,21 +167,16 @@ public class ScreenEncoder implements Device.RotationListener {
         codec.configure(format, null, null, MediaCodec.CONFIGURE_FLAG_ENCODE);
     }
 
-    private static void setSize(MediaFormat format, int orientation, int width, int height) {
+    private static void setSize(MediaFormat format, int width, int height) {
-        if (orientation % 2 == 0) {
+        format.setInteger(MediaFormat.KEY_WIDTH, width);
-            format.setInteger(MediaFormat.KEY_WIDTH, width);
+        format.setInteger(MediaFormat.KEY_HEIGHT, height);
-            format.setInteger(MediaFormat.KEY_HEIGHT, height);
-            return;
-        }
-        format.setInteger(MediaFormat.KEY_WIDTH, height);
-        format.setInteger(MediaFormat.KEY_HEIGHT, width);
     }
 
-    private static void setDisplaySurface(IBinder display, Surface surface, int orientation, Rect deviceRect, Rect displayRect) {
+    private static void setDisplaySurface(IBinder display, Surface surface, Rect deviceRect, Rect displayRect) {
         SurfaceControl.openTransaction();
         try {
             SurfaceControl.setDisplaySurface(display, surface);
-            SurfaceControl.setDisplayProjection(display, orientation, deviceRect, displayRect);
+            SurfaceControl.setDisplayProjection(display, 0, deviceRect, displayRect);
             SurfaceControl.setDisplayLayerStack(display, 0);
         } finally {
             SurfaceControl.closeTransaction();

server/src/main/java/com/genymobile/scrcpy/ScreenInfo.java

@@ -5,12 +5,12 @@ import android.graphics.Rect;
 public final class ScreenInfo {
     private final Rect contentRect; // device size, possibly cropped
     private final Size videoSize;
-    private final int rotation;
+    private final boolean rotated;
 
-    public ScreenInfo(Rect contentRect, Size videoSize, int rotation) {
+    public ScreenInfo(Rect contentRect, Size videoSize, boolean rotated) {
         this.contentRect = contentRect;
         this.videoSize = videoSize;
-        this.rotation = rotation;
+        this.rotated = rotated;
     }
 
     public Rect getContentRect() {
@@ -21,25 +21,11 @@ public final class ScreenInfo {
         return videoSize;
     }
 
-    public int getRotation() {
+    public ScreenInfo withRotation(int rotation) {
-        return rotation;
+        boolean newRotated = (rotation & 1) != 0;
-    }
+        if (rotated == newRotated) {
-
-    public ScreenInfo withRotation(int newRotation) {
-        if (newRotation == rotation) {
             return this;
         }
-        // true if changed between portrait and landscape
+        return new ScreenInfo(Device.flipRect(contentRect), videoSize.rotate(), newRotated);
-        boolean orientationChanged = (rotation + newRotation) % 2 != 0;
-        Rect newContentRect;
-        Size newVideoSize;
-        if (orientationChanged) {
-            newContentRect = Device.flipRect(contentRect);
-            newVideoSize = videoSize.rotate();
-        } else {
-            newContentRect = contentRect;
-            newVideoSize = videoSize;
-        }
-        return new ScreenInfo(newContentRect, newVideoSize, newRotation);
     }
 }

server/src/main/java/com/genymobile/scrcpy/Server.java

@@ -19,8 +19,7 @@ public final class Server {
         final Device device = new Device(options);
         boolean tunnelForward = options.isTunnelForward();
         try (DesktopConnection connection = DesktopConnection.open(device, tunnelForward)) {
-            ScreenEncoder screenEncoder = new ScreenEncoder(options.getSendFrameMeta(), options.getBitRate(), options.getMaxFps(),
+            ScreenEncoder screenEncoder = new ScreenEncoder(options.getSendFrameMeta(), options.getBitRate(), options.getMaxFps());
-                    options.getLockedVideoOrientation());
 
             if (options.getControl()) {
                 Controller controller = new Controller(device, connection);
@@ -80,8 +79,8 @@ public final class Server {
                     "The server version (" + clientVersion + ") does not match the client " + "(" + BuildConfig.VERSION_NAME + ")");
         }
 
-        if (args.length != 9) {
+        if (args.length != 8) {
-            throw new IllegalArgumentException("Expecting 9 parameters");
+            throw new IllegalArgumentException("Expecting 8 parameters");
         }
 
         Options options = new Options();
@@ -95,20 +94,17 @@ public final class Server {
         int maxFps = Integer.parseInt(args[3]);
         options.setMaxFps(maxFps);
 
-        int lockedVideoOrientation = Integer.parseInt(args[4]);
-        options.setLockedVideoOrientation(lockedVideoOrientation);
-
         // use "adb forward" instead of "adb tunnel"? (so the server must listen)
-        boolean tunnelForward = Boolean.parseBoolean(args[5]);
+        boolean tunnelForward = Boolean.parseBoolean(args[4]);
         options.setTunnelForward(tunnelForward);
 
-        Rect crop = parseCrop(args[6]);
+        Rect crop = parseCrop(args[5]);
         options.setCrop(crop);
 
-        boolean sendFrameMeta = Boolean.parseBoolean(args[7]);
+        boolean sendFrameMeta = Boolean.parseBoolean(args[6]);
         options.setSendFrameMeta(sendFrameMeta);
 
-        boolean control = Boolean.parseBoolean(args[8]);
+        boolean control = Boolean.parseBoolean(args[7]);
         options.setControl(control);
 
         return options;